Densifier Ultralit Hard Standard

Can be applied to: concrete of any age
Excellent penetration: 2-8 mm on steel trowled concrete
Increases abrasion resistance by: 15-40%
Very fast application: minutes instead of days
Form: Clear liquid
Specific Gravity: 1.10
pH: 10-11
Solids Content: 11%
Active Content: 100% of total solids
VOC Content: < 20 g/L
Freeze Point: 0°C
Flash Point: Non Flammable
Shelf Life: 2 years in original, unopened package


Ultralit Hard Standard is a water-based high solid lithium densifier used to densify, harden, dustproof new or existing concrete floors. Active lithium content of the product comes into chemical reaction with concrete components and form insoluble calcium silicate hydrate (CSH) that increases surface hardness, reduces dusting, makes maintenance of the floor easy. As the silicate-concrete chemical reaction is formed internally in upper layer of concrete, the protection of Ultralit Hard Standard is much more durable than traditional surface coatings and sealers, it will never peel or debond and is unaffected by moisture.

ESTIMATED COVERAGE RATES
Freshly placed uncured concrete: 15-20 m2/L (50-65 mL/m2).
Steel troweled cured concrete: 10-12 m2/L (85-100 mL/m2).
Cured honed / polished concrete: 10-15 m2/L (65-100 mL/m2).

---