Metal Bond Diamond Tools | concretecare.ie

FIND YOUR TOOLING

Three choices and the wall of 71 metal bond diamond tools becomes the few that fit. Not sure of one? Skip it, or ring the counter.

1 What does it fix to? On the machine plate - check the underside if unsure

Easy Fit plate HTG and GX grinders

Trapezoid Bolt-on, most planetaries

Cup wheel Angle grinders

2 What is the floor like? The bond is the opposite of the floor - we pick it for you

Hard, burnished concrete Power-floated warehouse slab, hard to scratch -> SOFT BOND Normal cured concrete Most floors - garage, retail, domestic slab -> MEDIUM BOND Soft, abrasive or green Fresh screed, rain-damaged, sandy surface -> HARD BOND Coating on top Epoxy, glue, paint - thickness matters more than floor -> PCD, NO BOND

3 How fine a finish? Start coarse; you can always come back finer

16-30 Rip and grind Coating removal, heavy stock 46-80 Flatten Levelling, first pass on bare slab 100-200 Hone Smooth matt, pre-polish 400-800 Semi-polish Low sheen 1800-3500 Polish Full gloss floors

ALL 71 METAL BOND DIAMOND TOOLS Reset choices

Split PCD Grinding Plate 250mm

EUR 195.00EUR 239.85ex VATinc VAT

Diamond Grinding Plate 20seg 250mm (G80, Medium Floor MF (Medium Bond))

EUR 191.00EUR 234.93ex VATinc VAT

Diamond Grinding Plate 16seg 250mm (G80, Medium Floor MF (Medium Bond))

EUR 171.00EUR 210.33ex VATinc VAT

Choose options

Diamond Grinding Plate 10seg 250mm (G25, Hard Floor HF (Soft Bond))

EUR 161.00EUR 198.03ex VATinc VAT

Turbo Grinding Cup 180mm Segment 10mm (G16)

EUR 99.00EUR 121.77ex VATinc VAT

PCD TCT Cup Disc 1/4 segments ∅115-180mm (∅ 115mm / 4.5")

EUR 85.00EUR 104.55ex VATinc VAT

PCD Cup Disc 1/4 segments ∅115-180mm (∅ 115mm / 4.5")

EUR 63.00EUR 77.49ex VATinc VAT

Diamond Tool EZ PCD 1x1/2+1segment+1tungsten point

Diamond Grinding Tool EZ PCD 1x1/2+1segment+1tungsten point (Left (Anti Clockwise))

EUR 60.00EUR 73.80ex VATinc VAT

[1000000013628] Easy Fit PCD Tool 2pcd 1/2" and 2 Arrow Segments (Left (Anti Clockwise))

Concrete Care

Easy Fit PCD Tool 2pcd 1/2" and 2 Arrow Segments (Left (Anti Clockwise))

EUR 59.00EUR 72.57ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid PCD 1x1/2+2 Segments (Left (Anti Clockwise))

EUR 50.00EUR 61.50ex VATinc VAT

Distar

Diamond Grinding cup Distar DGS-W Rotex ∅125-180mm (∅ 125mm / 5")

EUR 47.00EUR 57.81ex VATinc VAT

Distar

Diamond Grinding Cup Distar DGS-W Grindex ∅125-180mm (∅ 125mm / 5")

EUR 47.00EUR 57.81ex VATinc VAT

Choose options

Distar

Distar DGS-W Raptor Diamond Grinding cup ∅125-180mm (∅ 125mm / 5")

EUR 47.00EUR 57.81ex VATinc VAT

Double Row Grinding Cup disc EXTRA MAX ∅125-180mm (∅ 125mm / 5")

EUR 46.00EUR 56.58ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid PCD 2x1/4+1round Segment (Left (Anti Clockwise))

EUR 46.00EUR 56.58ex VATinc VAT

Diamond Tool Easy Fit PCD 2x1/4+1round Segment (Left (Anti Clockwise))

Concrete Care

Diamond Tool Easy Fit PCD 2x1/4+1round Segment (Left (Anti Clockwise))

EUR 44.00EUR 54.12ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid Split PCD 2 segment

EUR 44.00EUR 54.12ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid PCD 2x1/4+1Segment (Left (Anti Clockwise))

EUR 44.00EUR 54.12ex VATinc VAT

Diamond Tool Easy Fit PCD 2x1/4+1bar Segment (Left (Anti Clockwise))

Concrete Care

Diamond Tool Easy Fit PCD 2x1/4+1bar Segment (Left (Anti Clockwise))

EUR 44.00EUR 54.12ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid PCD 2x1/4 (Left (Anti Clockwise))

EUR 42.00EUR 51.66ex VATinc VAT

Ceramic Cup Wheel M14 ∅125-180mm (G50, ∅ 125mm / 5")

EUR 42.00EUR 51.66ex VATinc VAT

Diamond Tool Easy Fit PCD 2x1/4 Segments (Left (Anti Clockwise))

Concrete Care

Diamond Tool Easy Fit PCD 2x1/4 Segments (Left (Anti Clockwise))

EUR 39.00EUR 47.97ex VATinc VAT

Distar

Diamond Grinding Cup Distar DGM-S Hard Ceramics (G60)

EUR 37.51EUR 46.14ex VATinc VAT

Diamond Tool EZ 2 Segments (G30, Hard Floor HF (Soft Bond))

EUR 36.00EUR 44.28ex VATinc VAT

Choose options

[GTEF2RMF16G] Diamond Grinding Tool Easy Fit 2 Round Segment (G16, Medium Floor MF (Medium Bond))

Concrete Care

Diamond Grinding Tool Easy Fit 2 Round Segment (G16, Medium Floor MF (Medium Bond))

EUR 35.00EUR 43.05ex VATinc VAT

Choose options

Distar

Distar DGS-S Bestseller Expert Diamond Grinding Cup ∅125mm

Code: 17015424010

EUR 31.00EUR 38.13ex VATinc VAT

CLEARANCE

Diamond Tool Trapezoid 2 Segments (G30, Hard Floor HF (Soft Bond))

EUR 30.00EUR 36.90ex VATinc VAT

Turbo Grinding Cup Disc ∅100-180mm (G120, Hard Floor HF (Soft Bond), ∅ 125mm / 5")

EUR 30.00EUR 36.90ex VATinc VAT

[DTEF2AMF25G] Diamond Tool Easy Fit 2 Arrow 8mm

Concrete Care

Diamond Tool Easy Fit 2 Arrow 8mm

Code: DTEF2AMF25G

EUR 27.00EUR 33.21ex VATinc VAT

Distar

Diamond Grinding Cup Distar DGM-S Elite Active (0, 22.23mm)

EUR 27.00EUR 33.21ex VATinc VAT

Choose options

Distar

Diamond Grinding Cup Distar DGM-S Extra Active

Code: 17415029005

EUR 22.00EUR 27.06ex VATinc VAT

Backing Pad 125-180mm (∅ 125mm)

EUR 4.50EUR 5.54ex VATinc VAT

SuperAbrasive

Lavina Quick change One Button Tool Metal Bond (G6, Medium Floor MF (Medium Bond))

EUR 24.00EUR 29.52ex VATinc VAT

SuperAbrasive

Lavina Quick change 2 Button Tool Metal Bond (G14, Extra Hard Floor XHF (Extra Soft Bond))

EUR 36.00EUR 44.28ex VATinc VAT

Concrete Care

Diamond Tool Easy Fit Crushed PCD

EUR 48.00EUR 59.04ex VATinc VAT

X QUICKCHANGE HOLDER PLATE FOR 3 QC TOOLS HUSQVARNA PG530 PG680 D230

Code: XP-HUSQ-9

EUR 82.86EUR 101.92ex VATinc VAT

X QUICKCHANGE HOLDER PLATE FOR 6 QC TOOLS HUSQVARNA PG820 PG9500 D.270MM

Code: XP-HUSQ-10.63

EUR 91.43EUR 112.46ex VATinc VAT

Lavina

X QUICKCHANGE HOLDER PLATE FOR 3 QC TOOLS HTC 180MM

EUR 76.00EUR 93.48ex VATinc VAT

X QUICKCHANGE HOLDER PLATE FOR 3 QC TOOLS HTC D230

EUR 80.00EUR 98.40ex VATinc VAT

X QUICKCHANGE HOLDER PLATE FOR 6 "X"QC TOOLS HTC OR SASE D270

EUR 90.00EUR 110.70ex VATinc VAT

SuperAbrasive

Lavina QC SuperThick Disc in Metal Bond D80MM (G46)

EUR 71.42EUR 87.85ex VATinc VAT

SuperAbrasive

Lavina V-HARR TM 9" Ring Tools (G400)

EUR 55.20EUR 67.90ex VATinc VAT

12 Segment Turbo Diamond Grinding Cup Disc ∅180mm (G120, Medium Floor MF (Medium Bond))

EUR 59.00EUR 72.57ex VATinc VAT

Diamond Tool Easy Fit Split PCD 2 segment

Concrete Care

Diamond Tool Easy Fit Split PCD 2 segment

EUR 44.00EUR 54.12ex VATinc VAT

Diamond Grinding Nut DGW-S 49/M14 Hard Ceramics (G100)

EUR 25.00EUR 30.75ex VATinc VAT

PCD Cup Disc 125-180mm 3mm segment (∅ 125mm / 5")

EUR 75.00EUR 92.25ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate for Q8 HTG600

Code: 3.14.111.034

EUR 122.00EUR 150.06ex VATinc VAT

Carborundum Blocks (Coarse)

EUR 3.90EUR 4.80ex VATinc VAT

Choose options

Turbo Grinding Cup 250mm (Medium Floor MF (Medium Bond))

EUR 145.00EUR 178.35ex VATinc VAT

Grinding cup disc 125mm DGS-W Round Star

Code: 449252

EUR 43.00EUR 52.89ex VATinc VAT

Sintered Turbo Diamond Grinding Cup Disc ∅100-180mm (∅ 100mm / 4", M14)

EUR 26.00EUR 31.98ex VATinc VAT

Distar

Diamond grinding cup disc 125mm Distar DGS-W Grindex Star

Code: 16915387011

EUR 43.00EUR 52.89ex VATinc VAT

Tungsten Carbide Grinding Disc 115mm

Code: 302067

EUR 12.00EUR 14.76ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate 240mm for Klindex machine

EUR 115.00EUR 141.45ex VATinc VAT

Turbo Grinding Cup 250mm 10 segment (Medium Floor MF (Medium Bond))

EUR 145.00EUR 178.35ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate for HTG800-4E 250mm

Code: 3.31.162.040

EUR 145.00EUR 178.35ex VATinc VAT

Concrete Care

Easy Fit Cup Carrier Plate 250mm for HTG250D

Code: 3.22.211.003

EUR 95.00EUR 116.85ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate for X3 HTG580-2V

EUR 122.00EUR 150.06ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate 230mm for HTG680RC and HTG680SP

Code: 3.14.112.005

EUR 125.00EUR 153.75ex VATinc VAT

[GCA12525G] Arrow Cup Disc (∅ 125mm / 5")

PCD TCT 12,1/4 PCD + 6 TCT Grinding Plate 250mm (Left (Anti Clockwise))

EUR 195.00EUR 239.85ex VATinc VAT

Easy Fit PCD Tool 5pcd 1/4 and 1 Segments (Left (Anti Clockwise))

Concrete Care

Easy Fit PCD Tool 5pcd 1/4 and 1 Segments (Left (Anti Clockwise))

EUR 65.00EUR 79.95ex VATinc VAT

L Segment Diamond Grinding Cup (∅ 125mm / 5")

EUR 45.00EUR 55.35ex VATinc VAT

Concrete Care

Diamond Grinding Tool Easy Fit 2 Segments (G140, Hard Floor HF (Soft Bond))

EUR 30.00EUR 36.90ex VATinc VAT

Concrete Care

Diamond Tool Easy Fit Redilock Round 6 Segments (G140, Medium Floor MF (Medium Bond))

EUR 36.00EUR 44.28ex VATinc VAT

Choose options

[FTG10MF10] Diamond Tool Easy Fit Redilock Round 10 Segments (G10, Medium Floor MF (Medium Bond))

Concrete Care

Diamond Tool Easy Fit Redilock Round 10 Segments (G10, Medium Floor MF (Medium Bond))

EUR 42.50EUR 52.27ex VATinc VAT

Distar

Distar DGS-S Beton Diamond Grinding Cup ∅100mm-180mm (∅ 180mm / 7")

EUR 21.45EUR 26.38ex VATinc VAT

Concrete Care

Carrier plate for EASY FIT segments for GC250

Code: 3.14.112.059

EUR 98.00EUR 120.54ex VATinc VAT

Concrete Care

Easy Fit Carrier Plate for GX720-A

Code: 3.14.111.045

EUR 120.00EUR 147.60ex VATinc VAT

Distar

Diamond Grinding cup Distar DGS-S 125/22,23-77 Green Point

Code: 11127048020

Whether you are sanding self-leveling floors, hard concrete or removing paint or polymer coatings, the Green Point makes it easy. Its 77 diamond segments make any material melt away under the cup wheel. The lightweight body contributes to less wear and tear on your angle grinder and enhances work comfort, made of durable steel for safe operation. The large number of holes in the body allows for efficient dust extraction (with the use of a dust cover). The outer diameter is 125 mm. Seating diameter is 22.23 mm. It is recommended for use on angle grinders with a power of at least 1.2 kW at 10,000-12,500 RPM. The product meets the requirements of EN 13236.

EUR 43.00EUR 52.89ex VATinc VAT

Distar

Grinding cup DGM-S 45/5,8F Nectar 100 45mm

Code: 11143158050

Grinding porcelain stoneware is one of the most time-consuming stages of its processing, especially when low-power angle grinders are used.
NECTAR is the best choice in the world for tile processing.
Chip-free grinding and high speed are perfect parameters for comfortable and high-quality work.
High grinding performance allows the work to be done quickly while preventing the motor from overheating.
Designed for grinding in hard-to-reach places.
It has an outer diameter of 45 mm and a mounting hole of 5.8 mm.
NECTAR – a small tool with powerful results.

EUR 22.88EUR 28.14ex VATinc VAT