Grinder Polisher LAVINA ELITE L30LEU
NEW AND IMPROVED WATER SYSTEM with gravity-fed water supply from the water tank and hose connection (fitting is included) for optimal wet grinding. The advantage of the updated water system its getting more water under the machine and simpler maintenance.
Rear wheel set that makes grinder transportation and loading easier. It comes installed on all 20/25/30-inch Elite machines, and it is also available as an accessory for previous Elite models.
New optional lever for easier tilting (available for all 25/30-inch Elite machines).
Dust-proof planetary drive protects internal components from dust and moisture, which reduces maintenance and increases service life.
The heads of all electric grinders (except for 32″ Elites) have clockwise / right rotation. Use the black PCDs and Carbide Scrapers.
Easy-to-use integrated weights. With the weights down, you increase the grinding head pressure, and you can grind more aggressively.
Improved dust collection efficiency. Adjustable skirt with a flexible brush for better dust containment. Also, the vacuum hose connection is now closer to the dust source, and utilizes a metal camlock attachment.
Added protection on 3 phase, 220V models to prevent machine damage if plugged into high voltage.
Adjustable handle bar with multiple handle positions for more convenient operation and transportation. Make sure the handle position is locked when moving or using the machine.
Two LED lights for monitoring the floor – a detachable LED light (with a magnet) on the base in the front, and a second LED light in the back of the machine near the floor.
Convenient integrated lift points for moving the machine with a forklift.
Charging phone station with dual USB 2.0 ports, 3.15 Amps for faster charging with a shutoff when charge is complete.
Durable stainless steel cup holder.
GRINDING TIPS
Overlap around 25% of the machine work path between passes.
Check dust skirt to make sure it is all the way down, touching the floor to reduce airborne dust. Replace skirt if worn out or damaged.
When starting machine hold it firmly and start moving (don’t keep it in one spot while heads are spinning).
When stopping machine, keep moving until the grinding heads stop.
To tilt machine up for tooling changes, move the weight back.
To add more grinding pressure and grind more aggressively, put the weights down / forward.
Always lock the weights during transportation.
