Try our Leading Dustless Technology !
Dust generated on the construction site is a serious problem because of the damage caused to both the operatives health and to the environment. NKC-180 is the world best dust extractor for a wide range of popular angle grinders.

■MULTI ADAPTOR (NKC-180 ONLY)
Our revolutionary “Multi Adapting System” enables NKC-180 to be fitted onto a wide range of popular 180mm and 230mm Large Angle Grinders. ※

※Details on compatible models are listed in the instruction manual.



■POP-UP WINDOW (PAT.)
The front window of NKC-180 can be opened by one-click operation when grinding against the wall.



■FLEX-SEAL SYSTEM (PAT.)
With our FLEX-SEAL system, the head of NKC-180 is sufficiently flexible to allow a natural grinding action, yet still seals tightly to generate a strong stream into the duct.

MULTI ADAPTOR SYSTEM (PAT.P)
MULTI ADAPTOR SYSTEM enables to be fitted onto a wide range of 115-125mm angle grinders. *
*Except “X-LOCK” series by BOSCH and MAKITA.

■HANDLE PORT (M8/M10)
Grinder handle can be installed to the side of the cover that supports better control when cutting.


■EASY BLADE CHANGE
Detachable base unit system effective for releasing overtightened blade fixing nut.


■CUTTING GUIDE
Good-visible and Position-adjustable cutting line guide is equipped on the front roller.


■5-ROLLER SYSTEM
The 5 rollers cancel any frictions against the work surface, allowing x2 faster cutting speed compared to a No-roller shroud.

Distar Mechanic AirChaser 125-230 – Clean and Controlled Concrete Chasing

The AirChaser 125-230 is built for dry cutting and chasing in concrete, perfect for cable and tube laying in construction and renovation projects. It offers around 70 percent dust collection, helping maintain a cleaner work environment.

Includes adjustable cutting depth for precision and flexibility. Best paired with DISTAR Technic Advanced, Rapid, and Meteor blades for optimal performance.

45 degrees? It`s easy!!!
45 degrees angle finishing becomes more and more popular during the tile-laying processing.
Such type of joint has a better esthetic view, plus direct joint and joint covered with different types of tile profiles.
However, the tile cutting at 45 degrees is quite a time-consuming process. The new version 2.0 of the Slider 45 for angle grinder 115-125. The cutting tile at 45 degrees is became easier and simpler now!
- The device is easily installed on both 125 and 115 angle grinders.
- Use the scale to adjust the size of the angle cutting in accordance with your type of work.
- The increased size of the surface and stiffening ribs of the accessory ensures the precise positioning of the blade relative to the tile.
- Ergonomic plastic screws ensure precise adjustment.

Distar AIRSLIDER 90X115-125 – Precision Cutting for Large Format Porcelain

The AIRSLIDER 90X115-125 is designed for straight cuts on porcelain gress, especially on large slabs over 600 mm. It provides up to 90 percent dust collection, making it ideal for clean, efficient work.

Features adjustable cutting depth with a maximum depth of 14 mm, giving you control and flexibility. Best used with Perfect, Esthete, Esthete 2.0, Gres Master, Décor Slim, and Multigress blades.
Fits angle grinders 115 and 125 mm, any model and manufacturer.

It is used to remove dust in a process of grinding the edges of ceramic tiles, porcelain gres, granite and marble. The device is universal. Suitable for any models of angle grinders 115, 125 mm, of different manufacturer. It is easily installed on the standard casing of the angle grinder, securely fixed with a screw. Complete overview and control of the grinding area. Easy and comfortable work.

The AirDuster is the most popular cutting guard in the Mechanic line, designed for clean and efficient dry cutting of concrete, natural stone, and porcelain gres. It captures 70 to 90 percent of dust, with optimal performance when cutting in a pulling motion, reaching up to 90 percent dust collection.

Available in 115-125mm and 230mm versions, it is easy to install and compatible with all dry cutting blades in this range. A cost-effective solution for professionals who need reliable dust control on the job.

Metal tube for removal of dust. It is used with Mechanic Slider 45 2.0.

Improve dusty environment
Dust generated on the construction site is a serious problem because of the damage caused to both the operatives health and to the environment. "NK-230" is the FIRST product that controls the dust even when "plunge-cutting", and when fitted to a range of popular angle grinders.

■MULTI ADAPTER SYSTEM PAT.P
Our revolutionary “Multi Adapting System” enables"NK-230" to be fitted onto a wide range of popular 230mm Angle Grinders. ※
※Details on compatible models are listed in the instruction manual.


■UNIVERSAL DESIGN　
"NK-230" Every Tool, Every User, Every Application!


■PLUNGE DUST CONTROL PAT.
When plunge cutting, the Cutting Guide is automatically stored, the Front Brush of "NK-230" then contains the dust being blown forward. ※
※Max. cutting depth 40mm for effective dust extraction.

*Sufficient dust extraction performance cannot be obtained when the cutting depth exceed 40mm or larger, in plunge cutting.


■STABILIZING BAR SYSTEM
Front / Rear support bars stabilize the whole system, the 6-Rollers of"NK-230" cancel any friction against the work surface for a smooth cut.




■Quick Depth Change
Cutting depth of "NK-230" can be set in any length from 5mm up to 60mm(5mm step)

SLIDER 90x125is is used with an angle grinder 125mm. It increases the efficiency of cutting porcelain gres and other materials. The device does not scratch the surface, glides easily, adjustable depth of cut, fits most angle grinders.

Rubber

The First of its kind in the world.* 90% Dust Off with NO Vacuum !!
Dust generated on the construction site is becoming a more serious problem because of its harmfulness to our health and the environment. " NK-125A " is the FIRST product in the world with a SELF VACUUM SYSTEM. This enables 90% dust removal with NO vacuum cleaner ! *Researched in Jan 2009 by NAKAYA, as an attachment for Grinders, when cutting thick blocks with a new 125mm diamond blade.

■HYBRID DUST COLLECTION
" NK-125A" has 2 ways of dust collection.
You can choose between the self-vacuum mode and connecting to a vacuum cleaner, which removes nearly 100% of dust.




■SPIRAL DUCT
" NK-125A" does not impede the view of the cutting line nor the space around the operation handle.




■GUIDE BASE
" NK-125A" supports stable and accurate cutting.


■EASY BLADE CHANGE
The blade of " NK-125A" can be changed with just one operation without detaching the angle grinder.




■UNIVERSAL DESIGN
Exchangeable connector of" "NK-125A" enables use with a wider range of Grinders.
*We continually update our products to ensure compatibility with the latest Grinders.

Clean 45
Cutting ceramic tiles with an angle grinder goes with a lot of dust. Especially, a lot of dust is appeared when cutting ceramic tiles at an angle of 45 degrees, because more material is removed.
The device for angle grinder DUSTER 45 completely solves the problem of dust removal, almost all the dust goes into the vacuum cleaner. In addition to removing dust, the device has two other huge advantages:
-The system moves on a plastic support. There is no need to hold the angle grinder on weight for a long time, which relieves the hand. Much more work can be done without tiredness.
-The accessory pipe has a window that allows visually control the cutting process and be sure that the process is going as it should.
Tile grinding with the DUSTER 45 will be clean, comfortable and controlled.
The DUSTER 45 is universal. Adjustable for any 115, 125 angle grinders.

World’s First universal grinding dust shroud with innovative Multi Adaptor System.
NKC-125MA is the High-End grinding dust shroud applicable to almost ALL brand’s 115-125mm angle grinders with our innovative “Multi Adaptor System”. In addition the high dust collection performance of 97% and useful functions greatly improve work efficiency.

■MULTI ADAPTOR SYSTEM (PAT.P)
MULTI ADAPTOR SYSTEM enables to be fitted onto a wide range of 115-125mm angle grinders. *
*Except “X-LOCK” series by BOSCH and MAKITA.


■FLEX-SEAL SYSTEM (PAT.)
FLEX-SEAL SYSTEM provides a natural grinding action, yet still sealed tightly securing high suction power.


■MAGNETIC TRANSFORMATION
MAGNETIC TRANSFORMATION can be adapted for corner grinding by simply switching the magnetic front covers.
（Sufficient dust extraction performance cannot be obtained in corner grinding with 115mm wheel.）


■FREE CUP SELECTION
The attached height-adjustable flange system accommodates various types of grinding cups.(Some special grinding cups may not be installed)

World’s First universal cutting dust shroud with innovative Multi Adaptor System
NK-125MA is the High-End cutting dust shroud applicable to almost ALL brand’s 115-125mm angle grinders with our innovative “Multi Adaptor System”. In addition the high dust collection performance of 95% and the high stability of the 5-roller mechanism greatly improve work efficiency.

MULTI ADAPTOR SYSTEM (PAT.P)
MULTI ADAPTOR SYSTEM enables to be fitted onto a wide range of 115-125mm angle grinders. *
*Except “X-LOCK” series by BOSCH and MAKITA.

■HANDLE PORT (M8/M10)
Grinder handle can be installed to the side of the cover that supports better control when cutting.


■EASY BLADE CHANGE
Detachable base unit system effective for releasing overtightened blade fixing nut.


■CUTTING GUIDE
Good-visible and Position-adjustable cutting line guide is equipped on the front roller.


■5-ROLLER SYSTEM
The 5 rollers cancel any frictions against the work surface, allowing x2 faster cutting speed compared to a No-roller shroud.

45 degrees? Its easy!!!
45 degrees angle finishing becomes more and more popular during the tile-laying processing.
Such type of joint has a better esthetic view, plus direct joint and joint covered with different types of tile profiles.
However, the tile cutting at 45 degrees is quite a time-consuming process. The new version 2.0 of the Slider 45 for angle grinder 115-125. The cutting tile at 45 degrees is became easier and simpler now!
- The device is easily installed on both 125 and 115 angle grinders.
- Use the scale to adjust the size of the angle cutting in accordance with your type of work.
- The increased size of the surface and stiffening ribs of the accessory ensures the precise positioning of the blade relative to the tile.
- Ergonomic plastic screws ensure precise adjustment.

The LINER 115-125 is designed for grinding and polishing porcelain gres and natural stone, compatible with 115 and 125 mm angle grinders. It provides about 80 percent dust collection, helping keep the workspace cleaner.

Features include easy mounting and tool changes, quick adjustment of grinding angle, and an ergonomic design that reduces hand fatigue during long sessions. Recommended for use with CoolPAD, CleanPAD, StandART polishing pads, and Hard Ceramics 100 / M14 grinding cups.
The device can be installed on any 115- and 125-mm angle grinder. Setting up the device is very easy, due to the video tutorial on the Distar YouTube channel.

The VORTEX fits both 115 and 125 mm angle grinders and is designed for grinding concrete surfaces. It works perfectly with all DISTAR grinding cups in those diameters. The device collects over 90 percent of dust, depending on the surface, making cleanup easier and the workspace cleaner. Its design lets you grind even close to walls for maximum precision.

The delivery kit includes a grinding cover, clamping key, remote flange, adapter set for the gearbox, and a rubber adapter. Brushes are available separately as spare parts to keep your tool running smooth and efficient.

The EDGE DUSTER 115-125 is designed for grinding and polishing porcelain gres and natural stone, with dust collection efficiency above 90 percent for nearly dust free work. It fits both 115 and 125 mm angle grinders and allows precise edge and corner grinding.

Easy to use with CoolPAD, CleanPAD, and StandART polishing pads, and also offers the option to install FireFLY on the metal base for added functionality.

On a roll
The Mechanic Roller 115-125 is a cutting guard designed specifically for porcelain gress, ideal for large slab tiles over 600 mm in length. It collects 70 to 90 percent of dust and improves on the AirDuster with silicone wheels that allow the angle grinder to glide over the surface without leaving marks.

Supports slab cutting up to 1200 to 1800 mm, depending on the diamond blade performance. Best paired with Perfect, Esthete, Esthete 2.0, Gres Master, Décor Slim, and Multigress blades.

It is universal and fits all models of an angle grinder 115, 125 mm.