FIND YOUR BLADE

Three choices and the wall of 60 blades becomes the few that fit your saw and cut your material. The bore is the one to get right - a blade that will not go on the spindle is a wasted trip. Not sure of a step? Skip it, or ring the counter.

1 What is the blade going on? The blade diameter your machine takes, not the depth of cut

Angle grinder Hand-held, 115 to 230 mm blades

Floor saw or masonry saw 300 to 500 mm blades

Road saw or wall saw 600 mm and up, high powered

2 What are you cutting? The harder the material, the softer the bond - we have picked it for you

Concrete Cured slab, reinforced, foam concrete Asphalt Road surface, soft and abrasive Brick, block and paving Clinker, shingles, kerb Stone Granite, marble, sandstone Tile and porcelain Gres, ceramic, grout Metal Steel, rebar, sheet

3 What bore is the spindle? Measure the spindle, or read it off the old blade

22.23 mm The angle grinder standard 25.4 mm One inch, floor and masonry saws 35 mm and up 35, 60 and 70 mm road and wall saws M14 thread Screws straight on, no flange

Cutting tile, porcelain or ceramic? Ceramic and porcelain blades ->

3 BLADES FIT matched from your choices Reset choices

Distar

Distar 1A1RSS/C3-W Meteor ∅300-600mm Diamond Blade (∅ 300mm / 11.8”)

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

EUR 91.09EUR 112.04ex VATinc VAT~~was EUR 107.16EUR 131.81~~

Choose options

ADTnS

ADTnS 1A1RSS CLG RS-Z ∅300-600 Diamond Blade (∅ 400mm / 15.7”)

The ADTnS CLG RS-Z diamond blade is specially designed for processing concrete with a high level of reinforcement. It is used for working with high-strength concrete, as well as fine-grained heavy types. Also, it leaves a smooth, neat edge and does not damage the concrete structure when working. The segment has special holes and channels for removing the sludge from the work zone, which allows using the blade without additional cooling.
Available in six variations of diameters from 300 to 600 mm with the height of diamond segments 10 mm.
The blade has a hardened steel body with laser-welded diamond segments. This allows the blade to take significant loads and operate in hard load conditions.
A blade with a speed of up to 400 square centimeters per minute. The lifetime of the blade reaches 12 m2 (for a 350 mm blade on a 4.0 kW power cutter when cutting concrete M450 brand with 2.2% reinforcement with a rebar diameter of 16 mm)
It is used on power cutters and floor saws with a mounting of 25.4 mm.

EUR 87.42EUR 107.53ex VATinc VAT~~was EUR 102.85EUR 126.51~~