Highly reinforced concrete, hydraulic concrete.
Confident work with fittings, high cutting speed.
Diamond layer 15 mm.

Reinforced concrete, fresh concrete, abrasive materials.

Advantages: High service life and cutting speed on all types of concrete.

Application

reinforced concrete / concrete / brick / sandstone / paving slabs

Advantages

High cutting speed, efficient housing cooling. The height of the diamond segments is 17 mm.

Diamond cutting blade DISTAR TURBO SUPER MAX is a versatile tool for working with concrete. Provides soft cut and high speed when cutting reinforced concrete. It is used both for cutting standard concrete products and for highly reinforced concrete. Guarantees high speed of work, good passage of reinforcement and a sufficiently high lifetime.
Available in diameter of 232 millimeters, with a height of diamond layer of 15 mm. It is used with a standard angle grinder with power of 2.5 kW and rotation speed of up to 65000 rpm.
When tested on concrete, it showed a speed of up to 0.62 meters per minute, with lifetime of 125 running meters , while cutting 12 mm reinforcement in an amount of 6 bars per 1 l.m.
It is positioned as the highest-speed blade for cutting of concrete and reinforced concrete.
The innovative form of the diamond segment gives you the maximum effect when cutting with the Distar Turbo Super MAX.

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

Diamond cutting blade Distar 1A1RSS C1W CLASSIC H12 is designed for cutting concrete and medium-reinforced concrete. The blade has an increased height of the diamond segment up to 12 millimeters, which provides a sufficiently good lifetime, up to 400 meters on the gasoline power cutter and up to 500 on the floor saw.
It is known for high speed, which reaches the indicators of 2.25 meters and 1.5 meters on the floor saw and power cutter respectively.
Available in diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts).
The Distar CLASSIC H12 is a well-balanced quality blade combining the optimal value for the money. It is positioned in line as 5D extra class.

Diamond cutting blade DISTAR TURBO EXTRA MAX is used to process solid materials, in particular it shows itself well in cutting concrete (both reinforced and non-reinforced), all types of bricks including refractory, sandstone, and also sidewalk tiles.
The blade is capable of providing the most reliable performance throughout the lifetime, at a sufficiently high level of speed (up to 1.1 running meters per minute).
Has a sufficiently long lifetime, when making side cuts - up to 5 square meters, linear cutting - up to 160 running meters. It is allowed to work without additional cooling, as cooling is well provided by the increased number of holes in the core of the blade.
The blade has a diameter of 230 millimeters, with a thickness of a diamond layer of 2.5 mm, and its height of 12 mm. It can be used with all angle grinder machines with a mounting of 22.2 mm and a speed of up to 6650 rpm.

Diamond blade DISTAR 1A1RSS-W MAESTRO with turbo segment is intended for cutting natural stone, any kinds of granite, marble, bricks and sandstone and hard rock. Due to the diamond layer height of the 12 mm, it provides the maximum possible lifetime for dry cutting. At the same time, the layer thickness of 2.2 mm allows you to work as quickly and comfortably as possible.
The DISTAR MAESTRO is available in two diameters of 125 and 230 mm. Testing the blade on on 30 mm of Emelianovsky granite, the lifetime is up to 6.3 sq. m. and 230 running meters, with cutting speed of 1.5 m / min.
Can be used with any angle grinder equipped with a standard mounting of 22.2 mm. Due to its turbo segment form, which improves the removal of particles, the blade works best with angle grinder with an average power of 2.2 kW.

Diamond cutting blade DISTAR TURBO ELITE MAX is designed for professional processing of granite surfaces. Due to its unique structure and the presence of heat sink holes on the entire blade the blade provides the most soft and comfortable work. Perfect for cutting all types of granite.
It is available in diameter of 232 millimeters with the height of the diamond layer 12 mm. Used in combination with an angle grinder with mounting of 22.23mm.
Provides high speed cutting to 1.6 meters per minute, with lifetime of 225 linear meters while cutting hard granite at a depth of 30 mm.
Positions itself as the most balanced tool for processing granite surfaces.
For cutting of black granite type gabbro we recommend using a blade specially designed for this type of stone - diamond cutting blade Gabbro MAX.

The Distar Turbo Expert diamond disc is used for cutting concrete and paving slabs, for which it is the most optimal solution. It is also used when processing bricks and reinforced concrete. Due to the increased height of the diamond layer to 12 mm, the disk shows good work performance, having a high cutting speed of up to 0.4 meters per minute, while the service life of the disk reaches 60 linear meters in reinforced concrete of the M-400 brand. It is available on the market in diameters from 115 millimeters to 230. It can be used in combination with any KSHM equipped with a standard landing shaft (mounting).

Specially designed for professional cutting of colored granite. Stable cutting speed, long lifetime.

Diamond grinding cup DISTAR ELITE ACTIVE is used for grinding of hard materials such as marble and granite of any type. It is very easy to work with, and has a long lifetime, which makes the tool an indispensable helper for grinding work.
Available in two varieties - with flange and without. In addition, each type of cup wheel is available with several types of diamond grit size, and also in diameter 100 mm.
If there is a flange, the grain grit size may be 00, 0, 2 and 3, without flange - only 00 and 0.
For rougher cup wheels (with a grain size of 00 and 0) it is possible to work both dry or with additional water supply. In the case of a smaller grain size, all work is recommended only with water.
Used in combination with angle grinder with a power of 1 kW with rotation speed not exceeding 5000 rpm per minute. It is recommended to use the machine with a speed controller.
Each DISTAR ELITE ACTIVE cup wheel passes quality control for end runout, which eliminates any problems with the quality of the processed material.

Designed for quality and highly productive cutting of ceramic tile, porcelain gres, and natural rock. Universal application, broad spectrum of processed materials.

Diamond cutting blade Distar 1A1RSS C3 Technic Advanced is a novelty on the market and is used on floor saws and gasoline power cutters for cutting concrete with weak and medium reinforcement. Due to the unique diamond layer of the segment, a height of 15 millimeters provides a maximum soft and even cut. In addition, it provides high speed, which reaches 2.5 meters per minute with a lifetime of 300 meters.
Due to the presence of special segments, the effective removal of sludge from the working area is ensured.
Available in diameter from 300 to 400 millimeters for use with equipment with power of up to 9 kilowatts. Also in the assortment there are alternative blades of this series for angle grinder with a diameter of 115, 125, 150, 180 and 230 mm.
The cutting can be carried out both with additional water cooling, and without it.

TURBO wheels are produced with a continuous corrugated diamond layer, which increases the cutting speed, increases the service life and prevents premature overheating of the cutting edge.
Circles of this form are used without the use of coolant on hand-angle grinders for cutting building materials and natural stone.

Specially designed for professional cutting of colored granite. Stable cutting speed, long lifetime.

Diamond blade Distar 1A1RSS Bestseller Universal is suitable for handling rough materials, and thus becomes the best tool for cutting concrete, sandstone and paving tiles. It can also be used for work with brick, colored and black granite and reinforced concrete.
Equipped with a durable diamond layer of a special turbo form segments in combination with standard smooth, a height of 12 mm, which allows you to perform the highest quality cutting at a speed of 0,35 running meters per minute. In addition, it shows a sufficiently large lifetime, reaching 60 meters. When testing on reinforced concrete, with reinforcement 6 bars per meter, the blade showed a lifetime of almost 30 meters, at a speed of 0.3 m.
The Distar 1A1RSS Bestseller Universal blade is used with any angle grinder with a standard mounting of 22.23 mm, and is available in several diameters, from 115 to 232 millimeters.

Special segments form provide better cutting of concrete with the reinforcement. Very high cutting speed together with the low price. Cutting speed 250-300 sq.sm / min. Lifetime 5-7 sq. m.

The aggressive shape of the segments provides increased cutting speed. The thickness of the diamond segments is 2.4 mm, which is less than the thickness of the segments of most discs on the market. In addition to increased speed, this thickness creates a smaller cutting width, less processing of the processed material into sludge, respectively, creates a smaller amount of dust.Designed for cutting various building materials, such as reinforced concrete, paving slabs, brick, sandstone

The Baumesser Turbo Universal diamond cutting blade is a specialized tool for working with various materials. This diamond blade on the market is positioning itself as a universal product that can work with a wide range of construction materials. It is most often used when working with concrete, bricks and paving slabs. The range is presented in three variations, which differ in their diameter – 115, 125 and 230 mm.
The Baumesser Turbo Universal diamond cutting blade was designed to work as an angle grinder with a standard mounting hole diameter of 22.23 mm.
This blade showed quite good results during a practical test on reinforced concrete M400 (rebar 8 mm). In particular, the service life was 25 linear meters at a speed of 30 centimeters per minute.

Diamond disc Distar Turbo Bestseller Universal is a universal disc. Optimally suited for working with various materials such as concrete, sandstone and paving slabs. At the same time, it can also be used to work with bricks, colored and black granites.
Equipped with a strong diamond layer of a special form of turbo segments in combination with standard smooth ones, the height of which is 12 mm, allows you to perform the highest quality cut at a speed of 0.35 linear meters per minute. In addition, it shows a rather large resource of work, which reaches 60 meters. When testing on reinforced concrete of the M400 brand, with reinforcement of 6 pcs. per meter, the disk showed a working resource of 30 meters, at a speed of 0.3 m.
Distar Turbo Bestseller Universal is used on any KSHM with a standard seating position of 22.23 mm, while it is presented in several variations, from 115 to 232 millimeters in diameter.

45° is easy!
Cutting ceramic tiles at the 45-degree angle, also known as miter cutting, is the most common operation in finishing works. Many craftsmen perform it manually with an angle grinder. Diamond blades requirements: sufficient body rigidity with soft cutting concurrently, the possibility of grinding the edge.
There are the exact qualities that offered the Edge Dry blade. A wide 25 mm double-sided diamond layer reinforces the body and makes it rigid. A diamond-bearing bond with a honeycomb layer pattern makes your cutting soft and highly productive simultaneously. The large plane creates a fulcrum effect, directing the blade in a straight line. Additionally, you can grind the edge of the tile end.
With a blade like this, the 45-degree angle miter cutting is a pure pleasure!
The blade is available with a diameter of 125 mm, and a mounting seat of 22.2 mm. Used on angle grinder without the use of coolant.

The RAPID diamond blade is an advanced product for speedy work. Designed for cutting various building materials, such as reinforced concrete, paving slabs, brick, sandstone. The disc is also capable of working with various granites.

Its aggressive segment shape provides increased cutting speed.
The thickness of the diamond segments is 2.0 mm, which is less than the thickness of the segments of most discs on the market. In addition to increased speed, this thickness creates a smaller slot width, grinds less processed material into slurry, and, accordingly, creates a smaller volume of dust.

With all its advantageous characteristics, the circle has an affordable affordable price.
The disk is produced with an outer diameter of 125 mm with a mounting hole of 22.2 mm. It is used on angle grinders (bolt grinders) without the use of cooling.