The record speed in heavy conditions.
Highly reinforced concrete, high-brand concrete M500-M800, hydrotechnical concrete. This is a short list of materials that an ADTnS TM blade with RS segment can effectively handle.
The cutting speed and power is provided by the active geometry of the segments and their advanced composition of the bond. The segments are laser-fixed to a hardened steel core that can withstand high loads.
The blade is used on power/electric cutters and floor saws both with coolant and in dry mode.
It has a mounting of 25.4 mm. Available in diameters of 300, 350, 400 mm.

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

The ADTnS CLG RS-Z diamond blade is specially designed for processing concrete with a high level of reinforcement. It is used for working with high-strength concrete, as well as fine-grained heavy types. Also, it leaves a smooth, neat edge and does not damage the concrete structure when working. The segment has special holes and channels for removing the sludge from the work zone, which allows using the blade without additional cooling.
Available in six variations of diameters from 300 to 600 mm with the height of diamond segments 10 mm.
The blade has a hardened steel body with laser-welded diamond segments. This allows the blade to take significant loads and operate in hard load conditions.
A blade with a speed of up to 400 square centimeters per minute. The lifetime of the blade reaches 12 m2 (for a 350 mm blade on a 4.0 kW power cutter when cutting concrete M450 brand with 2.2% reinforcement with a rebar diameter of 16 mm)
It is used on power cutters and floor saws with a mounting of 25.4 mm.

Diamond disc Distar Bestseller Abrasive 1A1RSS/C1-W 300x2.8/1.8x9x25.4-18 F4 (13085129022) - segmental wear-resistant cutting disc for fast and high-quality cutting of all types of abrasive materials, asphalt, concrete, freshly laid concrete.

The segments are fixed to the body using laser welding. Optimal indicators of resource and cutting speed. Additional protection of the disc body with diamond segments.

It has a high service life, guaranteeing a high-quality final result

Diamond cutting blade Distar 1A1RSS C3 Technic Advanced is a novelty on the market and is used on floor saws and gasoline power cutters for cutting concrete with weak and medium reinforcement. Due to the unique diamond layer of the segment, a height of 15 millimeters provides a maximum soft and even cut. In addition, it provides high speed, which reaches 2.5 meters per minute with a lifetime of 300 meters.
Due to the presence of special segments, the effective removal of sludge from the working area is ensured.
Available in diameter from 300 to 400 millimeters for use with equipment with power of up to 9 kilowatts. Also in the assortment there are alternative blades of this series for angle grinder with a diameter of 115, 125 and 230 mm.
The cutting can be carried out both with additional water cooling, and without it.

The ADTnS CHG RM-W diamond blade is universal for processing reinforced concrete and brick. Due to the unique profile of the segments presented in the W shape, it provides a high level of productivity when cutting reinforced and non-reinforced concrete, at a low cost of the tool.
Blade has a lifetime up to 8 square meters with a cutting speed of up to 300 centimeters per minute when cutting with 4.0 kW power cutter reinforced concrete with 2.2% reinforcement with 16 mm rebar.
It is a well-balanced blade with a high cutting capacity for reinforcements. Available in 3 variations with a diameter of 300, 350 and 400 mm. The number of segments is 22, 24, and 28, respectively.
It is used for working on electric/power cutters with a mounting of 25.4 mm.