Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 500 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

The record speed in heavy conditions.
Highly reinforced concrete, high-brand concrete M500-M800, hydrotechnical concrete. This is a short list of materials that an ADTnS TM blade with RS segment can effectively handle.
The cutting speed and power is provided by the active geometry of the segments and their advanced composition of the bond. The segments are laser-fixed to a hardened steel core that can withstand high loads.
The blade is used on power/electric cutters and floor saws both with coolant and in dry mode.
It has a mounting of 25.4 mm. Available in diameters of 300, 350, 400 mm.

Diamond blade Distar 1A1RSS/C1S-W Sprinter Plus is designed for cutting asphalt and other abrasive materials of the same degree of hardness. The blade is positioned as having a really long lifetime, but quite productive. The lifetime reaches 2000 running meters, at a speed of 1.5-1.8 linear meters /min, depending on the equipment used and the material characteristics.
When cutting asphalt and concrete to a depth of more than 7 centimeters it is recommended to use additional water cooling, and in also to perform work in several approaches, which will reduce the wear of the tool and increase the cutting speed.
Available in several diameters from 300 to 600 millimeters. The blade is used with floor saws and power cutters.

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

The ADTnS CLG RS-Z diamond blade is specially designed for processing concrete with a high level of reinforcement. It is used for working with high-strength concrete, as well as fine-grained heavy types. Also, it leaves a smooth, neat edge and does not damage the concrete structure when working. The segment has special holes and channels for removing the sludge from the work zone, which allows using the blade without additional cooling.
Available in six variations of diameters from 300 to 600 mm with the height of diamond segments 10 mm.
The blade has a hardened steel body with laser-welded diamond segments. This allows the blade to take significant loads and operate in hard load conditions.
A blade with a speed of up to 400 square centimeters per minute. The lifetime of the blade reaches 12 m2 (for a 350 mm blade on a 4.0 kW power cutter when cutting concrete M450 brand with 2.2% reinforcement with a rebar diameter of 16 mm)
It is used on power cutters and floor saws with a mounting of 25.4 mm.

Advantages of Super diamond wheels
The Distar Super series disc with a segmented structure and a diamond layer is the best choice for cutting any concrete: from reinforced to fresh.

This Distar blade model combines good cutting speed with great cutting potential. The high resource life of the consumable lies in its design - the disk is divided into segments with wide intervals of the C1 type.

For performing work on hard and abrasive materials, this solution is the most acceptable, because The grooves promote uniform removal of sludge.

In addition, this design reduces overheating during cutting of material, thereby protecting the expensive diamond coating.

Cutting wheel Distar Super 1A1RSSC1-WAn important feature is that there is no need for cooling when making a cut.

The cutting wheel Distar 1A1RSS/C1-W 450x3.8/2.8x10x25.4-26 F4 Super 121 850 85 028 is reliable and durable.

It copes well with cutting concrete and shows high-performance results.

Compared to abrasive-type wheels, diamond discs have clear advantages:

maintain the required cutting depth;
do not change their diameter when performing work;
do not reduce speed.
This type of wheel is used for cutting reinforced and fresh concrete, abrasive building materials.

The Distar 1A1RSS C1W CLASSIC H12 diamond blade is designed for cutting concrete, both unreinforced and lightly and moderately reinforced. Due to the fact that the disc has an increased height of the diamond segment of up to 12 millimeters, it provides a fairly good service life, in particular up to 400 meters on a gas cutter and up to 500 on a joint cutter.
It has a fairly high operating speed, which reaches 2.25 meters per minute and 1.5 m per minute on a gas cutter, respectively.
Available in an assortment of diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts)..
Distar CLASSIC H12 is positioned on the market as a balanced circle that combines the optimal price-quality ratio and belongs to the extra class 5D

Diamond disc Distar Bestseller Abrasive 1A1RSS/C1-W 300x2.8/1.8x9x25.4-18 F4 (13085129022) - segmental wear-resistant cutting disc for fast and high-quality cutting of all types of abrasive materials, asphalt, concrete, freshly laid concrete.

The segments are fixed to the body using laser welding. Optimal indicators of resource and cutting speed. Additional protection of the disc body with diamond segments.

It has a high service life, guaranteeing a high-quality final result

Diamond cutting blade Distar 1A1RSS C3 Technic Advanced is a novelty on the market and is used on floor saws and gasoline power cutters for cutting concrete with weak and medium reinforcement. Due to the unique diamond layer of the segment, a height of 15 millimeters provides a maximum soft and even cut. In addition, it provides high speed, which reaches 2.5 meters per minute with a lifetime of 300 meters.
Due to the presence of special segments, the effective removal of sludge from the working area is ensured.
Available in diameter from 300 to 400 millimeters for use with equipment with power of up to 9 kilowatts. Also in the assortment there are alternative blades of this series for angle grinder with a diameter of 115, 125 and 230 mm.
The cutting can be carried out both with additional water cooling, and without it.

The ADTnS CHG RM-W diamond blade is universal for processing reinforced concrete and brick. Due to the unique profile of the segments presented in the W shape, it provides a high level of productivity when cutting reinforced and non-reinforced concrete, at a low cost of the tool.
Blade has a lifetime up to 8 square meters with a cutting speed of up to 300 centimeters per minute when cutting with 4.0 kW power cutter reinforced concrete with 2.2% reinforcement with 16 mm rebar.
It is a well-balanced blade with a high cutting capacity for reinforcements. Available in 3 variations with a diameter of 300, 350 and 400 mm. The number of segments is 22, 24, and 28, respectively.
It is used for working on electric/power cutters with a mounting of 25.4 mm.

The Distar 1A1RSS/C3-H Premier Active diamond cutting disc is the universal solution for working with natural materials. The disc is designed with special HIT technology especially for cutting natural stone on stationary machines. The Distar Premier Active is ideal for soft granite and hard sandstone, also cutting hard granite and abrasive sandstone.
Although the disc is more suitable for high production cutting of the two previously mentioned materials, it is versatile in its application to natural stones. The disc has a good service life and high working speed.
The disc is available in 3 diameters of 300, 350 and 400 mm with a bore of 25,4 mm for use on stationary equipment such as tile cutters and other tools with an appropriate bore.
If you have any questions about the product, please contact our competent consultants.

Innovative blade specially developed for precise and clean 45 degrees cutting of gres tiles!
Sandwich type of diamond layer includes coarse diamonds inside and fine diamonds on the sides.
Special diamond layer and steel core design reinforces the blade and provides both high cutting performance and fine grinding of the edge.

An excellent blade for small amounts of work and a wide range of construction materials. It is used on power cutters and low-power flat saws.
The blade quickly cuts weakly reinforced concrete, foam concrete, bricks, paving slabs.
Turbocharged segments provide intermittent cutting, effectively cooling the cutting area.
The outer diameter of the blade is 350 mm, the seat is 25.4 mm
When cutting strong materials such as concrete, it is mandatory to use water as cooling. When working with soft materials, such as bricks and paving slabs, the use of cooling is not necessary.
You don't know what kind of material you will encounter in a construction place? Or you will have to cut various materials with a limited budget, this blade is for you.

Diamond cutting blade Distar 1A1RSS C3 HIT STAYER is for working with asphalt and has become one of the best representatives of the 5D class. The blade provides a high level of speed, while having a good lifetime. In particular, at a speed of 1.75 meters per minute it can cut up to 950 running meters of material.
Can be used both dry and wet. Due to the increased layer height of diamond segment up to 10 millimeters and the presence of additional protective segments, the edge stays neat and clean, and effective sludge removal allows to maintain the integrity of the steel core.
A blade is used on power gasoline cutters and floor saws with a tolerance of 300 to 450 mm in diameter.
Designed for work with low and medium power drives (4-9 kW).

The aggressive shape of the segments provides increased cutting speed. The thickness of the diamond segments is 2.4 mm, which is less than the thickness of the segments of most discs on the market. In addition to increased speed, this thickness creates a smaller cutting width, less processing of the processed material into sludge, respectively, creates a smaller amount of dust.Designed for cutting various building materials, such as reinforced concrete, paving slabs, brick, sandstone

JETCut blade is a New superior fast-cutting blade.
The W-shape segments provide exceptional fast cutting of highly-reinforced concrete.
The diamond segments are 12mm high, thickness 2.8 mm and are laser-welded onto a precision steel core.
The JetCut is 15% lighter than normal blade due to the thinner segments and thinner steel core.
The JetCut is the first choice for petrol and electric cutters.
available in diameters: 304, 354, 404 mm