Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 500 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

The record speed in heavy conditions.
Highly reinforced concrete, high-brand concrete M500-M800, hydrotechnical concrete. This is a short list of materials that an ADTnS TM blade with RS segment can effectively handle.
The cutting speed and power is provided by the active geometry of the segments and their advanced composition of the bond. The segments are laser-fixed to a hardened steel core that can withstand high loads.
The blade is used on power/electric cutters and floor saws both with coolant and in dry mode.
It has a mounting of 25.4 mm. Available in diameters of 300, 350, 400 mm.

Diamond blade Distar 1A1RSS/C1S-W Sprinter Plus is designed for cutting asphalt and other abrasive materials of the same degree of hardness. The blade is positioned as having a really long lifetime, but quite productive. The lifetime reaches 2000 running meters, at a speed of 1.5-1.8 linear meters /min, depending on the equipment used and the material characteristics.
When cutting asphalt and concrete to a depth of more than 7 centimeters it is recommended to use additional water cooling, and in also to perform work in several approaches, which will reduce the wear of the tool and increase the cutting speed.
Available in several diameters from 300 to 600 millimeters. The blade is used with floor saws and power cutters.

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

The ADTnS CLG RS-Z diamond blade is specially designed for processing concrete with a high level of reinforcement. It is used for working with high-strength concrete, as well as fine-grained heavy types. Also, it leaves a smooth, neat edge and does not damage the concrete structure when working. The segment has special holes and channels for removing the sludge from the work zone, which allows using the blade without additional cooling.
Available in six variations of diameters from 300 to 600 mm with the height of diamond segments 10 mm.
The blade has a hardened steel body with laser-welded diamond segments. This allows the blade to take significant loads and operate in hard load conditions.
A blade with a speed of up to 400 square centimeters per minute. The lifetime of the blade reaches 12 m2 (for a 350 mm blade on a 4.0 kW power cutter when cutting concrete M450 brand with 2.2% reinforcement with a rebar diameter of 16 mm)
It is used on power cutters and floor saws with a mounting of 25.4 mm.

Advantages of Super diamond wheels
The Distar Super series disc with a segmented structure and a diamond layer is the best choice for cutting any concrete: from reinforced to fresh.

This Distar blade model combines good cutting speed with great cutting potential. The high resource life of the consumable lies in its design - the disk is divided into segments with wide intervals of the C1 type.

For performing work on hard and abrasive materials, this solution is the most acceptable, because The grooves promote uniform removal of sludge.

In addition, this design reduces overheating during cutting of material, thereby protecting the expensive diamond coating.

Cutting wheel Distar Super 1A1RSSC1-WAn important feature is that there is no need for cooling when making a cut.

The cutting wheel Distar 1A1RSS/C1-W 450x3.8/2.8x10x25.4-26 F4 Super 121 850 85 028 is reliable and durable.

It copes well with cutting concrete and shows high-performance results.

Compared to abrasive-type wheels, diamond discs have clear advantages:

maintain the required cutting depth;
do not change their diameter when performing work;
do not reduce speed.
This type of wheel is used for cutting reinforced and fresh concrete, abrasive building materials.

The Distar 1A1RSS C1W CLASSIC H12 diamond blade is designed for cutting concrete, both unreinforced and lightly and moderately reinforced. Due to the fact that the disc has an increased height of the diamond segment of up to 12 millimeters, it provides a fairly good service life, in particular up to 400 meters on a gas cutter and up to 500 on a joint cutter.
It has a fairly high operating speed, which reaches 2.25 meters per minute and 1.5 m per minute on a gas cutter, respectively.
Available in an assortment of diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts)..
Distar CLASSIC H12 is positioned on the market as a balanced circle that combines the optimal price-quality ratio and belongs to the extra class 5D

Diamond disc Distar Bestseller Abrasive 1A1RSS/C1-W 300x2.8/1.8x9x25.4-18 F4 (13085129022) - segmental wear-resistant cutting disc for fast and high-quality cutting of all types of abrasive materials, asphalt, concrete, freshly laid concrete.

The segments are fixed to the body using laser welding. Optimal indicators of resource and cutting speed. Additional protection of the disc body with diamond segments.

It has a high service life, guaranteeing a high-quality final result

Diamond cutting blade Distar 1A1RSS C3 Technic Advanced is a novelty on the market and is used on floor saws and gasoline power cutters for cutting concrete with weak and medium reinforcement. Due to the unique diamond layer of the segment, a height of 15 millimeters provides a maximum soft and even cut. In addition, it provides high speed, which reaches 2.5 meters per minute with a lifetime of 300 meters.
Due to the presence of special segments, the effective removal of sludge from the working area is ensured.
Available in diameter from 300 to 400 millimeters for use with equipment with power of up to 9 kilowatts. Also in the assortment there are alternative blades of this series for angle grinder with a diameter of 115, 125 and 230 mm.
The cutting can be carried out both with additional water cooling, and without it.

Highly reinforced concrete, hydraulic concrete.
Confident work with fittings, high cutting speed.
Diamond layer 15 mm.

The ADTnS CHG RM-W diamond blade is universal for processing reinforced concrete and brick. Due to the unique profile of the segments presented in the W shape, it provides a high level of productivity when cutting reinforced and non-reinforced concrete, at a low cost of the tool.
Blade has a lifetime up to 8 square meters with a cutting speed of up to 300 centimeters per minute when cutting with 4.0 kW power cutter reinforced concrete with 2.2% reinforcement with 16 mm rebar.
It is a well-balanced blade with a high cutting capacity for reinforcements. Available in 3 variations with a diameter of 300, 350 and 400 mm. The number of segments is 22, 24, and 28, respectively.
It is used for working on electric/power cutters with a mounting of 25.4 mm.

The Distar 1A1RSS/C3-H Premier Active diamond cutting disc is the universal solution for working with natural materials. The disc is designed with special HIT technology especially for cutting natural stone on stationary machines. The Distar Premier Active is ideal for soft granite and hard sandstone, also cutting hard granite and abrasive sandstone.
Although the disc is more suitable for high production cutting of the two previously mentioned materials, it is versatile in its application to natural stones. The disc has a good service life and high working speed.
The disc is available in 3 diameters of 300, 350 and 400 mm with a bore of 25,4 mm for use on stationary equipment such as tile cutters and other tools with an appropriate bore.
If you have any questions about the product, please contact our competent consultants.

Innovative blade specially developed for precise and clean 45 degrees cutting of gres tiles!
Sandwich type of diamond layer includes coarse diamonds inside and fine diamonds on the sides.
Special diamond layer and steel core design reinforces the blade and provides both high cutting performance and fine grinding of the edge.

An excellent blade for small amounts of work and a wide range of construction materials. It is used on power cutters and low-power flat saws.
The blade quickly cuts weakly reinforced concrete, foam concrete, bricks, paving slabs.
Turbocharged segments provide intermittent cutting, effectively cooling the cutting area.
The outer diameter of the blade is 350 mm, the seat is 25.4 mm
When cutting strong materials such as concrete, it is mandatory to use water as cooling. When working with soft materials, such as bricks and paving slabs, the use of cooling is not necessary.
You don't know what kind of material you will encounter in a construction place? Or you will have to cut various materials with a limited budget, this blade is for you.

Diamond cutting blade Distar 1A1RSS C3 HIT STAYER is for working with asphalt and has become one of the best representatives of the 5D class. The blade provides a high level of speed, while having a good lifetime. In particular, at a speed of 1.75 meters per minute it can cut up to 950 running meters of material.
Can be used both dry and wet. Due to the increased layer height of diamond segment up to 10 millimeters and the presence of additional protective segments, the edge stays neat and clean, and effective sludge removal allows to maintain the integrity of the steel core.
A blade is used on power gasoline cutters and floor saws with a tolerance of 300 to 450 mm in diameter.
Designed for work with low and medium power drives (4-9 kW).

Reinforced concrete, fresh concrete, abrasive materials.

Advantages: High service life and cutting speed on all types of concrete.

Application

reinforced concrete / concrete / brick / sandstone / paving slabs

Advantages

High cutting speed, efficient housing cooling. The height of the diamond segments is 17 mm.

Diamond cutting blade DISTAR TURBO SUPER MAX is a versatile tool for working with concrete. Provides soft cut and high speed when cutting reinforced concrete. It is used both for cutting standard concrete products and for highly reinforced concrete. Guarantees high speed of work, good passage of reinforcement and a sufficiently high lifetime.
Available in diameter of 232 millimeters, with a height of diamond layer of 15 mm. It is used with a standard angle grinder with power of 2.5 kW and rotation speed of up to 65000 rpm.
When tested on concrete, it showed a speed of up to 0.62 meters per minute, with lifetime of 125 running meters , while cutting 12 mm reinforcement in an amount of 6 bars per 1 l.m.
It is positioned as the highest-speed blade for cutting of concrete and reinforced concrete.
The innovative form of the diamond segment gives you the maximum effect when cutting with the Distar Turbo Super MAX.

Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).

Diamond cutting blade Distar 1A1RSS C1W CLASSIC H12 is designed for cutting concrete and medium-reinforced concrete. The blade has an increased height of the diamond segment up to 12 millimeters, which provides a sufficiently good lifetime, up to 400 meters on the gasoline power cutter and up to 500 on the floor saw.
It is known for high speed, which reaches the indicators of 2.25 meters and 1.5 meters on the floor saw and power cutter respectively.
Available in diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts).
The Distar CLASSIC H12 is a well-balanced quality blade combining the optimal value for the money. It is positioned in line as 5D extra class.

Diamond cutting blade DISTAR TURBO EXTRA MAX is used to process solid materials, in particular it shows itself well in cutting concrete (both reinforced and non-reinforced), all types of bricks including refractory, sandstone, and also sidewalk tiles.
The blade is capable of providing the most reliable performance throughout the lifetime, at a sufficiently high level of speed (up to 1.1 running meters per minute).
Has a sufficiently long lifetime, when making side cuts - up to 5 square meters, linear cutting - up to 160 running meters. It is allowed to work without additional cooling, as cooling is well provided by the increased number of holes in the core of the blade.
The blade has a diameter of 230 millimeters, with a thickness of a diamond layer of 2.5 mm, and its height of 12 mm. It can be used with all angle grinder machines with a mounting of 22.2 mm and a speed of up to 6650 rpm.

For Angle Grinders.
Diamond cutting blade DISTAR TURBO EXTRA MAX is used to process solid materials, in particular, it shows itself well in cutting concrete (both reinforced and non-reinforced), all types of bricks including refractory, sandstone, and also sidewalk tiles.

The blade is capable of providing the most reliable performance throughout the lifetime, at a sufficiently high level of speed (up to 1.1 running meters per minute).

Has a sufficiently long lifetime, when making side cuts - up to 5 square meters, linear cutting - up to 160 running meters. It is allowed to work without additional cooling, as cooling is well provided by the increased number of holes in the core of the blade.

The blade has a diameter of 232 millimeters, with a thickness of a diamond layer of 2.5 mm, and its height of 12 mm.

DISTAR TURBO DUPLEX can be rightfully considered one of the best tools for grinding and cutting, as it effectively combines both functions of the grinding cup wheel and the cutting blade.
The use of the blade allows you to work productively with granite and marble using hand-held angle grinding machines. The treatment of material is carried out in a dry manner, without additional cooling with water.
The steel core of the blade is equipped with diamond layer, which makes it possible for you to perform any type of cuts, including curved ones, without any difficulty.
Distar Duplex is available in one version, with a diameter of 125 millimeters, and can be used with any angle grinder machine with a standard mount of the M14 blade. A diamond layer with a thickness of 2.8 millimeters provides a long lifetime.

Diamond blade DISTAR 1A1RSS-W MAESTRO with turbo segment is intended for cutting natural stone, any kinds of granite, marble, bricks and sandstone and hard rock. Due to the diamond layer height of the 12 mm, it provides the maximum possible lifetime for dry cutting. At the same time, the layer thickness of 2.2 mm allows you to work as quickly and comfortably as possible.
The DISTAR MAESTRO is available in two diameters of 125 and 230 mm. Testing the blade on on 30 mm of Emelianovsky granite, the lifetime is up to 6.3 sq. m. and 230 running meters, with cutting speed of 1.5 m / min.
Can be used with any angle grinder equipped with a standard mounting of 22.2 mm. Due to its turbo segment form, which improves the removal of particles, the blade works best with angle grinder with an average power of 2.2 kW.

Diamond cutting blade DISTAR TURBO ELITE MAX is designed for professional processing of granite surfaces. Due to its unique structure and the presence of heat sink holes on the entire blade the blade provides the most soft and comfortable work. Perfect for cutting all types of granite.
It is available in diameter of 232 millimeters with the height of the diamond layer 12 mm. Used in combination with an angle grinder with mounting of 22.23mm.
Provides high speed cutting to 1.6 meters per minute, with lifetime of 225 linear meters while cutting hard granite at a depth of 30 mm.
Positions itself as the most balanced tool for processing granite surfaces.
For cutting of black granite type gabbro we recommend using a blade specially designed for this type of stone - diamond cutting blade Gabbro MAX.

The Distar Turbo Expert diamond disc is used for cutting concrete and paving slabs, for which it is the most optimal solution. It is also used when processing bricks and reinforced concrete. Due to the increased height of the diamond layer to 12 mm, the disk shows good work performance, having a high cutting speed of up to 0.4 meters per minute, while the service life of the disk reaches 60 linear meters in reinforced concrete of the M-400 brand. It is available on the market in diameters from 115 millimeters to 230. It can be used in combination with any KSHM equipped with a standard landing shaft (mounting).

Specially designed for professional cutting of colored granite. Stable cutting speed, long lifetime.

Diamond grinding cup DISTAR ELITE ACTIVE is used for grinding of hard materials such as marble and granite of any type. It is very easy to work with, and has a long lifetime, which makes the tool an indispensable helper for grinding work.
Available in two varieties - with flange and without. In addition, each type of cup wheel is available with several types of diamond grit size, and also in diameter 100 mm.
If there is a flange, the grain grit size may be 00, 0, 2 and 3, without flange - only 00 and 0.
For rougher cup wheels (with a grain size of 00 and 0) it is possible to work both dry or with additional water supply. In the case of a smaller grain size, all work is recommended only with water.
Used in combination with angle grinder with a power of 1 kW with rotation speed not exceeding 5000 rpm per minute. It is recommended to use the machine with a speed controller.
Each DISTAR ELITE ACTIVE cup wheel passes quality control for end runout, which eliminates any problems with the quality of the processed material.

Designed for quality and highly productive cutting of ceramic tile, porcelain gres, and natural rock. Universal application, broad spectrum of processed materials.

Diamond cutting blade Distar 1A1RSS C3 Technic Advanced is a novelty on the market and is used on floor saws and gasoline power cutters for cutting concrete with weak and medium reinforcement. Due to the unique diamond layer of the segment, a height of 15 millimeters provides a maximum soft and even cut. In addition, it provides high speed, which reaches 2.5 meters per minute with a lifetime of 300 meters.
Due to the presence of special segments, the effective removal of sludge from the working area is ensured.
Available in diameter from 300 to 400 millimeters for use with equipment with power of up to 9 kilowatts. Also in the assortment there are alternative blades of this series for angle grinder with a diameter of 115, 125, 150, 180 and 230 mm.
The cutting can be carried out both with additional water cooling, and without it.

TURBO wheels are produced with a continuous corrugated diamond layer, which increases the cutting speed, increases the service life and prevents premature overheating of the cutting edge.
Circles of this form are used without the use of coolant on hand-angle grinders for cutting building materials and natural stone.

Specially designed for professional cutting of colored granite. Stable cutting speed, long lifetime.

Diamond blade Distar 1A1RSS Bestseller Universal is suitable for handling rough materials, and thus becomes the best tool for cutting concrete, sandstone and paving tiles. It can also be used for work with brick, colored and black granite and reinforced concrete.
Equipped with a durable diamond layer of a special turbo form segments in combination with standard smooth, a height of 12 mm, which allows you to perform the highest quality cutting at a speed of 0,35 running meters per minute. In addition, it shows a sufficiently large lifetime, reaching 60 meters. When testing on reinforced concrete, with reinforcement 6 bars per meter, the blade showed a lifetime of almost 30 meters, at a speed of 0.3 m.
The Distar 1A1RSS Bestseller Universal blade is used with any angle grinder with a standard mounting of 22.23 mm, and is available in several diameters, from 115 to 232 millimeters.

The Distar Stone diamond disc is designed to work with most natural materials: granite (all types), sandstone (all types), marble.

The cutting surface of segment discs is divided into "sections" - they not only grind concrete with diamonds, but also cut into it with their ends.

Dust is removed through the "gap" between the segments. At the same time, the type of cutting can be used dry (without cooling).

Special segments form provide better cutting of concrete with the reinforcement. Very high cutting speed together with the low price. Cutting speed 250-300 sq.sm / min. Lifetime 5-7 sq. m.

The aggressive shape of the segments provides increased cutting speed. The thickness of the diamond segments is 2.4 mm, which is less than the thickness of the segments of most discs on the market. In addition to increased speed, this thickness creates a smaller cutting width, less processing of the processed material into sludge, respectively, creates a smaller amount of dust.Designed for cutting various building materials, such as reinforced concrete, paving slabs, brick, sandstone

The Baumesser Turbo Universal diamond cutting blade is a specialized tool for working with various materials. This diamond blade on the market is positioning itself as a universal product that can work with a wide range of construction materials. It is most often used when working with concrete, bricks and paving slabs. The range is presented in three variations, which differ in their diameter – 115, 125 and 230 mm.
The Baumesser Turbo Universal diamond cutting blade was designed to work as an angle grinder with a standard mounting hole diameter of 22.23 mm.
This blade showed quite good results during a practical test on reinforced concrete M400 (rebar 8 mm). In particular, the service life was 25 linear meters at a speed of 30 centimeters per minute.

Diamond disc Distar Turbo Bestseller Universal is a universal disc. Optimally suited for working with various materials such as concrete, sandstone and paving slabs. At the same time, it can also be used to work with bricks, colored and black granites.
Equipped with a strong diamond layer of a special form of turbo segments in combination with standard smooth ones, the height of which is 12 mm, allows you to perform the highest quality cut at a speed of 0.35 linear meters per minute. In addition, it shows a rather large resource of work, which reaches 60 meters. When testing on reinforced concrete of the M400 brand, with reinforcement of 6 pcs. per meter, the disk showed a working resource of 30 meters, at a speed of 0.3 m.
Distar Turbo Bestseller Universal is used on any KSHM with a standard seating position of 22.23 mm, while it is presented in several variations, from 115 to 232 millimeters in diameter.

JETCut blade is a New superior fast-cutting blade.
The W-shape segments provide exceptional fast cutting of highly-reinforced concrete.
The diamond segments are 12mm high, thickness 2.8 mm and are laser-welded onto a precision steel core.
The JetCut is 15% lighter than normal blade due to the thinner segments and thinner steel core.
The JetCut is the first choice for petrol and electric cutters.
available in diameters: 304, 354, 404 mm

1000 cuts+
Steel profile, pipes, and fittings are cut with abrasive blades based on silicon carbide. This became a cutting classic. But now his majesty Diamond comes into play!
Lets compare the main characteristics of 125 abrasive and diamond blades when cutting 20 mm steel pipe with a wall thickness of 1.0 mm.
- The resource of the abrasive blade is up to 50 cuts. Diamond – at least 1000 cuts.
- Dimensional stability. After 7 cuts with an abrasive, the blade is worn off so that it does not cut through the pipe to the full depth. Even after 1000 cuts diamond has the same diameter.
- The diamond blade emits many times fewer sparks, making the work comfortable.
- And the most important thing is safety. The steel body of the diamond blade will not collapse under any circumstances in comparison with the abrasive blade.
Blade 125 Baumesser MetalCUT. Work with pleasure!

You don`t always exactly know what kind of material have to be cut on a construction, home repairs or workshops. Steel, wood, plastic, concrete, brick are the most common materials we have to deal with. It is inconvenient and expensive having blades for each material. The best solution is universal blade for all occasions.
1A1R Baumesser PRO Rex blades flexibility is ensured by their vacuum sintering manufacturing technology. Diamond grains are fixed with a strong metal bond in one layer. There are a lot of well-opened diamonds with sharp cutting edges at the same time during the cutting process. The blades cut any material very quickly with stable high speed.
Blades are supplied with an outer diameter of 125, 230 mm with a 22.2 mm bore for angle grinders. Blades with a diameter of 350 mm with a 25.4 mm bore are used on hand petrol saws, can be used both – dry cutting and with water cooling.

45° is easy!
Cutting ceramic tiles at the 45-degree angle, also known as miter cutting, is the most common operation in finishing works. Many craftsmen perform it manually with an angle grinder. Diamond blades requirements: sufficient body rigidity with soft cutting concurrently, the possibility of grinding the edge.
There are the exact qualities that offered the Edge Dry blade. A wide 25 mm double-sided diamond layer reinforces the body and makes it rigid. A diamond-bearing bond with a honeycomb layer pattern makes your cutting soft and highly productive simultaneously. The large plane creates a fulcrum effect, directing the blade in a straight line. Additionally, you can grind the edge of the tile end.
With a blade like this, the 45-degree angle miter cutting is a pure pleasure!
The blade is available with a diameter of 125 mm, and a mounting seat of 22.2 mm. Used on angle grinder without the use of coolant.

1A1RSS/C1-W
900x4,5/3,7x35-48 F17 ARPS 40x4,5x10+2
R395 CLW 900 Meteo

The RAPID diamond blade is an advanced product for speedy work. Designed for cutting various building materials, such as reinforced concrete, paving slabs, brick, sandstone. The disc is also capable of working with various granites.

Its aggressive segment shape provides increased cutting speed.
The thickness of the diamond segments is 2.0 mm, which is less than the thickness of the segments of most discs on the market. In addition to increased speed, this thickness creates a smaller slot width, grinds less processed material into slurry, and, accordingly, creates a smaller volume of dust.

With all its advantageous characteristics, the circle has an affordable affordable price.
The disk is produced with an outer diameter of 125 mm with a mounting hole of 22.2 mm. It is used on angle grinders (bolt grinders) without the use of cooling.

LevelCUT
For glue undercutting
Often, to install tile leveling systems, it is necessary to undercut the old tile glue between the tile and the screed.
It is most convenient to perform this task with a diamond blade mounted on an angle grinder
The LevelCUT diamond blade is best suited for such works. Due to the small diameter of 60 mm and the aluminum flange, it is very comfortable to perform undercutting even in hard-to-reach places.
The LevelCUT blade is a reliable assistant that should be on hand for every master.
The blade is mounting on the angle grinder 115, 125 mm. An outer diameter is 60 mm and a seat is M14. It used without cooling.

Fast and comfortable cutting of wall slots in different materials possible
Highly reduced workload thanks to the intelligent system of interlacing arrangement of segments, since chiseling away of the center is not required. Great time saving thanks to cutting in one step
Reduction of dirt and dust, since the material is removed cleanly and completely from the slot
Customized slots for individual lines, or for Ø 20 and 25 mm-empty pipes. Max. cutting width: 20 mm (2 rows 628298000) / 30 mm (3 rows 628299000)
Diameter x bore125 x 22.23 mm // 5 x 7/8 "
Segment dimensions28.5 x 7 mm // 1 1/8 x 0.275 "
Number of segments30
Maximum speed12200 rpm

1A1RSS/C1-W
904x4,5/3,7x12x60-48 F11
CLW 900 Meteor

1A1RSS/C1-W
904x4,5/3,7x12x60-48 F11
CLW 900 Meteor

1A1RSS/C1-W
904x4,5/3,7x12x60-48 F11
CLW 900 Meteor

1A1RSS/C1-W
904x4,5/3,7x12x60-48 F11
CLW 900 Meteor